Adapter Tesla SAE J1772

Adapter Tesla SAE J1772 for public charging stations that use a J1772 of the connector cable. This adapter can support charging for all Tesla cars.

 How to use:

We recommend using the following steps:

 1. Plug in the J1772 end of the adapter to the charging cable                                                                                     2. Plug in the Tesla end of the adapter to the car’s charging socket                                                                         3. After the adapter has clicked in place, and you are ready for the charge*

*Don’t forget to activate the charging station

When you finish with the charge, disconnect the vehicle side first and then the charging station side. Remove the cable from the charging station when not in use.

How to store:

The charging adapter is the lifeline of your electric vehicle, and it is essential to keep it protected. Store the adapter in a dry place, preferably a storage bag. Moisture in the contacts will result in the cable not working. Suppose this happens place the cable in a warm and dry place for 24 hours. Avoid leaving the cable outside where the sun, wind, dust, and rain can get to it. Dust and dirt will result in the cable not charging.

The Adapter Tesla SAE J1772 is very easy to use and store. The cable is designed for both outdoor and indoor charging, and it has IP54 (Ingress Protection), which means that it has protection from dust and splash of water from any direction.